0

Nintendo Switch Presentation Tonight/Tomorrow – 12th/13th January 2017

For those of you in the USA the Nintendo Switch Presentation is tonight, but due to time differences, that means those of you in the UK will have to get up at 4AM tomorrow morning, the times are as follows:

 

QCdrn7M.jpg

 

bn1zqiQ.png

 

 

You can watch it by visiting this link

https://www.nintendo.co.uk/Nintendo-Switch/Nintendo-Switch-1148779.html

0
SHARES
0

Continue Reading

0

Nintendo Switch Presentation Tonight/Tomorrow – 12th/13th January 2017

For those of you in the USA the Nintendo Switch Presentation is tonight, but due to time differences, that means those of you in the UK will have to get up at 4AM tomorrow morning, the times are as follows:

 

QCdrn7M.jpg

 

bn1zqiQ.png

 

 

You can watch it by visiting this link

https://www.nintendo.co.uk/Nintendo-Switch/Nintendo-Switch-1148779.html

0
SHARES
0

Continue Reading

0

HBL2HBC and Forwarder

Fix94 at gbatemp made a elf file that takes you directly to the Hombrew Channel on the vWii side. You can get the latest here:  https://github.com/FIX94/hbl2hbc/releases

 

Quote from source 

Quote

So this is just something I’ve made while playing around with things for CBHC which were not successful but I thought some people may find this handy so I just made it into its own elf.
If you have the homebrew channel installed on your vwii and you want to quickly boot into it from the wiiu side, this elf will allow you to directly boot into it via the homebrew launcher.
If you want to launch other title ids you can do so by adding them into the hbl2hbc config file.

 

Source: https://gbatemp.net/threads/hbl2hbc-v1-1-boot-from-wiiu-hbl-into-vwii-hbc.455673/

 

Then brenj at the same forum made the elf into its own channel. You’ll need a CFW or something that has patches for that kind of thing. 

 

quote from source

 

Quote

HBL2HBC Forwarder Channel by brienj

Setup:
Put the “WiiU 2 HBC” folder from the archive into the install folder of your SD card. Install the app with the latest wup installer. Requires sig patching of some kind.
The forwarder loads hbl2hbc.elf located at sd:/wiiu/apps/hbl2hbc/hbl2hbc.elf

Instructions:
After install, select the “WiiU 2 HBC” icon on the system menu with your SD card with the hbl2hbc.elf inserted.
Profit!

 

Source https://gbatemp.net/threads/release-wiiu2hbc-a-hbl2hbc-forwarder-channel.455991/

 

0
SHARES
0

Continue Reading

0

[Released] DRC Sim Mobile Client – Wii U Gamepad Emulator – Wii U

DRC Sim Mobile Client – Wii U Gamepad Emulator

View File


Rolando Islas has released an application that lets you emulate your Wii U Gamepad on your phone, which is super great for Wii U owners such as @BobbyBlunt and myself, who’s Wii U Pads have decided to just stop working, there is a method to do this on your PC, but having it on your phone or tablet seems better, here is a video of it in action:

 


 

0
SHARES
0

Continue Reading

0

.@DroidXAce Reveals Nintendo Switch Hori Accessories – Fake Or Real

We have all been down this road numerous times, every time a games console is due for its debut a ton of fake articles come out, i am not saying that is what French Twitter user DroidXAce has done and they do look genuine, on top of that they are for a third party device maker so who would go to all that trouble making a fake for that ?, also all the images have ‘concept images’ watermarked onto them.

 

Anyhow i will add a forum poll asking you your opinion, here are some of the images:

bhmOqfB.jpg

Oawsiz7.jpg

49fopDo.jpg

AdvVyvU.jpg

kiu95mX.jpg

0ee1Rco.jpg

38Z0BU0.jpg

 

You can see more images on DroidXAce’s Twitter Account here

0
SHARES
0

Continue Reading

0

.@DroidXAce Reveals Nintendo Switch Hori Accessories – Fake Or Real

We have all been down this road numerous times, every time a games console is due for its debut a ton of fake articles come out, i am not saying that is what French Twitter user DroidXAce has done and they do look genuine, on top of that they are for a third party device maker so who would go to all that trouble making a fake for that ?, also all the images have ‘concept images’ watermarked onto them.

 

Anyhow i will add a forum poll asking you your opinion, here are some of the images:

bhmOqfB.jpg

Oawsiz7.jpg

49fopDo.jpg

AdvVyvU.jpg

kiu95mX.jpg

0ee1Rco.jpg

38Z0BU0.jpg

 

You can see more images on DroidXAce’s Twitter Account here

0
SHARES
0

Continue Reading

0

[Guide] How To Add Avatar/Profile Pic On PlayStationHaX

If you are an active member or new member, you will notice that you cannot upload a profile pic to the forum, i have done this as a way to protect against anything malicious, of course it is not fool proof, but it is a way of better protecting the forum, so you might wonder how you can add your own profile pic, there are two options and the first is by using a URL, the second and better way is by using Gravatar.

 

Gravatar can be used on many sites across the internet and your profile can be linked to one of your emails or all of them, so whenever you post on certain sites, especially WordPress ones your profile pic will always be present, so here is how to do it:

 

1.) Go to your profile, this is easy enough done, click on your name anywhere on the forum and you shall be taken there.

2.) Locate your avatar, it should be the default one if you are a new member and it looks like this:

PBPvmvN.png

3.) Clicking the icon should take you to this:

FPigLFY.png

4.) Choose Gravatar and then go to this website, clicking that link will take you directly to the registration page.

5.) The registration page should look like this once you have the information filled in, keep note of your email address and change the username if you want to:

wXmrzQL.png

6.) Once logged into Gravatar, your page will probably be empty and you will need to upload the avatar you want to use, you can also add numerous other emails if you want, i have two on my account and it appears i also have another account, but that has nothing to do with this guide, your Gravatar page should look like this:

NGlXCKA.png

7.) Now go back to your profile page on the forum, you should have the profile part still open and if you chose Gravatar, you should add the email you registered to to the Gravatar site with:

uXArb30.png

 

 

That is the best way to add your own profile pic to the forum, with that one email, you can have the same profile pic on numerous websites, without having to upload a pic each time.

0
SHARES
0

Continue Reading

0

HaxChi and CBHC made by FIX94

FIX94 has released a few excellent tools, I haven’t seen a thread on them yet. Perhaps I didn’t search well but anyways I’ll post about it.

 

First off I’ll start with Haxchi 

 

You can get the latest release here: https://github.com/FIX94/haxchi/releases

 

Haxchi is a permanent homebrew channel installed on the WiiU menu ( Given that you do not update or delete the game from system manager). It requires you to have a permanent DS virtual game purchased and installed on your WiiU, this list of applicable titles can be found here highlighted: https://github.com/FIX94/haxchi/blob/master/installer/src/gameList.h#L14-L102

 

Once you have your game installed you place the HaxChi files onto your SD card and access the HBL through the browser and install the package. It will recognize the DS title on your console and let you proceed through the installation. I believe if you have multiple DS titles it lets choose which one you want to install over. 

 

Once it is installed you’ll notice on your menu that the DS game now has a new icon and now launches particular homebrew that you set it to.

 

By that I mean before you installed HaxChi there is a config.txt in the SD card files that lets you set what you want the default software to launch be. Also it has a modifier to let you launch a secondary homebrew software by holding down a button. For instance you can have just clicking it bring up the HBL and you can have by holding the ‘A’ button and clicking the title launch a CFW or redNAND or whatever else you’d like. The options being a fw.img on your SD card, or a .elf that can do a multitude of things e.g HBL.

 

That’s about all I can think of for HaxChi. 

 

Entire source quote:

Quote

After doing quite a lot of work I now think it is time to release this – Version 2.0 of Haxchi!
If you happen to have a DS VC title that is listed in this file then go ahead and grab the current Haxchi .zip file, make sure to NOT click on “source code” instead of the current .zip:
https://github.com/FIX94/haxchi/releases
Just extract the contents of it onto your sd card. The “haxchi” folder right now just consists of a simple replacement icon, logo and replacing the game title with “Haxchi”.
Its example config.txt will boot homebrew launcher by default, a fw.img on your sd card when holding A and holding B will send you back into the system menu which will get full signature and region patching and support this ftpiiu-everywhere version; Haxchi comes with its own sysnand CFW included.
For a full list of all compatible buttons that you can use for the config.txt go here.
The content of this haxchi folder can be changed to your liking – if you want to you can also add in an alternative bootSound.btsnd to replace the original startup sound which I did not do in this example haxchi folder.
After setting up the content to your liking all you have to do is run the Haxchi Installer in homebrew launcher, select the game you want to install it on and that is it! If you ever want to make changes to the content folder it installed to then just re-run the Haxchi Installer and install it again, you dont have to reinstall the game beforehand, it’ll just overwrite the previous haxchi installation with your new data.
Please note, this will ONLY WORK WITH DS VC GAMES ON NAND, if you have a ds vc game on USB you want to use then please move it to your NAND first and ideally detach your usb device before using this installer .elf, if you dont remove your usb devices it may freeze up on exiting or not install properly.
This also ONLY LOADS THE .ELF VERSION OF THE HOMBEBREW LAUNCHER which as of right now is v1.4 so make sure to keep that on your sd card or you will just get error -5 when starting your haxchi channel. Once you are in the homebrew launcher it is also perfectly compatible with loading .rpx files, you just cant use haxchi itself to load .rpx files.

Let me know if everything works fine since there is only so much I can test myself.

 

 

Source : https://gbatemp.net/threads/haxchi-v2-0-a-persistent-wiiu-hack.451071/

 

Looking at it again I haven’t used this new version I don’t know what ftpiiu everywhere is. I am guessing it the patch that let’s you access the file system of the console with those python scripts or GUI versions. Also I think the HaxChi CFW is a new concept to me as well. 

 

If you change your mind about how you want it configured by the way, after you edit the config.txt you have to reinstall HaxChi from HBL. I didn’t realize this myself at first. 

 

P.S. I said permanent earlier, what I meant by that is you don’t have to keep setting it up but you can revert back the actual DS title if you wanted to. So kind of permanent if you want?

 

 

Second, onto CBHC (Cold boot HaxChi)

 

This is also made by FIX94. This is a homebrew software that makes it so when you turn on your WiiU it automatically boots your HaxChi title. Thus you need to have HaxChi installed prior another thing I haven’t seen mentioned but I assume it works is the whole button modifier thing. I think if you hold down a button while booting your WiiU the same thing will happen. 

 

This is actually quite easy to install basically get this zip from here https://github.com/FIX94/haxchi/releases for the latest and install through HBL. 

 

This can also be uninstalled by accessing the same package through HBL, it will detect you have HaxChi and offer to uninstall. 

 

Now the nature of this software of screwing with your booting process can be detrimental if executed incorrectly or if you do something erroneous after the fact ( such as uninstalling the title from system manager in the WiiU). 

 

If you have a USB external storage device plugged into your WiiU and titles set to automatically install there prior to installing HaxChi or CBHC you need to make sure the game is installed onto your system (NAND) and not your USB drive. This is pretty important. 

 

Quote from source on features:

Quote
Features


Anyways, enough of that – what can this actually do when installed?
It offers a basic menu from which you can boot into:

 

  • The system menu which will get full signature and region patching and support this ftpiiu-everywhere version; CBHC comes with its own sysnand CFW included.
  • You can boot into the .elf version of homebrew launcher.
  • You can boot a fw.img or Mocha CFW on your sd card which could be useful for rednand and if you really need to connect to wupserver from a pc, but thats really only interesting as a developer. For pretty much anyone the system menu setting (which uses the included CBHC CFW) is enough, on top of that using Mocha or fw.img for sysnand can lead to bootup problems and takes far longer to boot so please just dont do it, I dont know how often I can repeat that point anymore.

If after installing CBHC no menu pops up when you turn on your console then you may have run into the very rare case in which CBHC did not properly install and your Haxchi installation still runs, in this case just go back into the homebrew launcher and try installing it again.

 

Quote about the warning:

 

Quote
WARNING


Please ONLY INSTALL THIS if you already have the normal Haxchi installed and know that it works perfectly, just install it over your existing Haxchi installation, again, DO NOT INSTALL IT from a freshly downloaded, never started/tested game or you may brick. Also ONLY INSTALL THIS IF THE DS VC IS BOUGHT FROM THE ESHOP ON THAT CONSOLE AND ON NAND AND YOU HAVE NO USB CONNECTED WHEN USING THE INSTALLER. 

If a new CBHC version comes out you can just run the installer again and let it overwrite the existing CBHC installation, same rules as on the first installation still apply.

 

Source thread itself: https://gbatemp.net/threads/cbhc-v1-5-coldboot-haxchi-cfw.452615/

 

 

This stuff was made by FIX94 ( the original poster in the source threads)

0
SHARES
0

Continue Reading

0

[Guide] How To Hack NES Classic Mini

 the NES Classic has been hacked and there is no need for you to open the system at all?

Hackers in Japan and Russia figure out soft-mod solutions to adding new games to the NES Classic. This means you don’t need to grab a screwdriver or a soldering iron to mod yours.screen-shot-2017-01-06-at-5-52-30-pm-800x480

 

According to Reddit’s NESClassicMods community, it won’t work until you’ve created a save file in Super Mario Bros‘ first slot.  Once you’ve done that, connect your NES Classic Edition to a computer via a micro-USB cable, then boot the NES in “FEL” mode. This is done by holding down the system’s reset button while pushing down the power button from a powered-off state. While you’re booting, you should also run a “sunxi-FEL” interface on your computer. (An open-source version of compatible “USBBoot” software can be found here.)

The rest of the steps are a bit risky since they require copying your NES Classic’s internal data to your computer, then modifying and adding files via an application made by hackers. Doing so, by the way, includes supplying your own ROM files.

 

 

Once you’ve added your own roms and custom JPGs that will appear in the NES Classic’s “box art” GUI, you’ll have to repack the hardware’s kernel, then fully flash the hardware yourself. Now keep in mind this can result in a brick so use at your own risk. Do everything  correctly, and you’ll see the roms you’ve added appear in the slick, default interface.

As this exploit has only been in the wild for less than a day, we’ve yet to confirm exactly how many commercial and homebrew games are compatible with the NES Classic’s default emulator.

here are the steps to make this happen as found here on PASTEBIN,

  1. 1. Go here http://linux-sunxi.org/FEL/USBBoot#Using_sunxi-fel_on_Windows and install driver with zadig.
  2. Fel mode is activated by holding down reset while switching on power button – http://linux-sunxi.org/FEL
  3. Dump uboot and kernel from your nes. uboot should have md5 b13b538f6b7c86623ceea69c456d4eb5, if it’s not, it might be unsafe to continue. 8ce1857653874e8f0cd3fe68abe1bb4a and 9b8046b47c947d9fa322976c038003e0 also confirmed to work.
  4. 3. Prepare roms – with nesmini shell, rom is a directory, not a file. Template+tool here https://www.dropbox.com/s/3t3wrkhw26shro0/nesromtool.zip?dl=0
  5. tl;dr you need a rom, image, and optional *.desktop file. it’s a text file you can edit.
  6. 4. Place rom dirs in
  7. mod/hakchi/transfer/rootfs/usr/share/games/nes/kachikachi/
  8. nesromtool will do this for you if you unpack it in nesromtool subdir of hakci-gui tree
  9. 5. unpack kernel / repack kernel
  10. 6. Do a memboot, nes will shutdown, switch it to fel mode again.
  11. 7. Flash kernel <- do this ONLY ONCE. there is no need to ever do it again. until custom kernels appear that is.
  12. If there is a save in the first slot of Super Mario Bros. it will load the mod, otherwise it will load stock shell.
  13. You also get getty on uart interface, but there isn’t much use in it if you don’t have uart soldered.
  14. DISCLAIMER: I’m not responsible for any damage you might inflict upon your nesmini

Well i hope you find this useful and that you own a NES Classic  to do this with but please be safe since no buddy wants to brick this awesome little system.

0
SHARES
0

Continue Reading